DeVilbiss SleepCube Bilevel ST Bipap With Humidifier

DeVilbiss SleepCube Bilevel ST Bipap device is designed to enhance the breathing of patients with spontaneous respiration. It will not completely take over the breathing for the patient, but instead helps a patient who has chronic respiratory failure, difficulty breathing, or obstructive sleep apnoea

Features:

• Pressure range of between 3 and 25 cm H2O
• Three operating modes: CPAP, Spontaneous, Spontaneous Timed and Timed only
• Smallest footprint of all leading CPAP devices with heated humidification system attached
• SmartCode remote data compliance feature included, which encodes usage data into a series of letters and numbers that can be easily decrypted using free software or online at http://www.sleepcube.com
• Among the quietest CPAPs on the market - only 26 dBA
• Can be operated from a 12V DC source such as that found in a motor home (not with heated humidifier) and will switch automatically to AC power if connected and available
• Auto-switching universal power supply of 100 – 240 V and 50 – 60 Hz, and automatic altitude compensation between 0 and 2600m (9000ft)
• Auto on/off automatically starts the flow of air on breathing into the mask and stops the flow of air when mask is removed
• Delay pressure ramp eases the device to the prescribed pressure. Ramp delay settings of 0 to 45 minutes in 5-minute increments
• Visual mask off alert feature
• Supplied with 6ft tubing as standard.
• Large slip-resistant pads on bottom of unit minimise movement on the bedside table during the night
• Patient air tubing extends from the back of unit to enhance visual appeal
• Integrated heated humidification system easily docks onto the bottom of the unit without requiring a separate hose or power cord
• SmartLink module and software available for more detailed patient therapy management. Data is transferred to the PC via SD card for further analysis and reporting using the SmartLink software package.
• Integrated event detection feature
• Real-time display - LCD display shows actual pressure, leak rate and patient breathing parameters such as breath rate, I/E ratio, minute volume and tidal volume
• Customisable trigger - the sensitivity of the trigger can be adjusted on a scale of 1 – 10 (1 being most sensitive)

MEASUREMENT AND PRODUCT RANGE

While we work to ensure that product information on our website is correct, on occasion manufacturers may alter their ingredient lists. Actual product packaging and materials may contain more and/or different information than that shown on our website. All information about the products on our website is provided for information purposes only. We recommend that you do not solely rely on the information presented on our website. Please always read the labels, warnings, and directions provided with the product before using or consuming a product. In the event of any safety concerns or for any other information about a product please carefully read any instructions provided on the label or packaging and contact the manufacturer. Content on this site is not intended to substitute for advice given by medical practitioner, pharmacist, or other licensed health-care professional. Contact your health-care provider immediately if you suspect that you have a medical problem. Information and statements about products are not intended to be used to diagnose, treat, cure, or prevent any disease or health condition. NeoShine Healthcare Alliance FZ LLC accepts no liability for inaccuracies or misstatements about products by manufacturers or other third parties on website sehaaonline.com. This does not affect your statutory rights.